Preprocessing in Hardware
Digital Rapids encoding systems are renowned for the quality of their compressed video output. The same original content, encoded with the same codec at the same data rates, can still result in varying output quality depending on the encoding system used. The key to delivering consistently high quality compressed video is properly preparing the source video before handing it off to the codecs for compression.
Our unique hardware-based video preprocessing technology is built on our many years of experience in the broadcast video market. With our purpose-built hardware solutions, we are able to deliver video quality that is far superior to typical encoding platforms. The advanced video preprocessing features in our hardware — including motion adaptive deinterlacing, scaling, filtering, and motion-adaptive 3D noise reduction — deliver multiple benefits. In addition to improving the quality of the video and the audio, our hardware-based preprocessing also reduces the amount of work that the software compression engine needs to do, which means that you can process more video and audio streams simultaneously. This preprocessing also delivers the highest possible quality video (up to 30% more efficient to compress) to the codecs, ensures optimal quality in the output media stream and enables the most efficient use of bandwidth in the compressed result.
Motion Adaptive De-Interlacing
 When creating video to be shown on progressive display devices, a key function of the preprocessing pipeline is the de-interlacing technology. Properly processing the video from its native interlace form factor to high quality progressive-scan data is extremely important to the overall quality of the resulting image. Not only will any de-interlacing artifacts be visible, but they also increase the work that the codec must do to compress the image, resulting in lower quality at a given data rate. The advanced motion adaptive de-interlacing capabilities of the DRC-Stream hardware set it aside from other systems.
Common forms of deinterlacing include linear temporal (meshing two fields together to create a single frame, also known as ‘Weave’) and linear spatial (‘Bob’, discarding one field and interpolating the result back to full resolution). The Weave method creates a lot of motion artifacting, but works well in scenes with little to no motion. The Bob method avoids motion artifacts, but at the cost of considerable vertical detail. Another technology, Vertical Temporal (VT), discards one field (like Bob) but rather than simply interpolating the remaining field back to full resolution it uses the discarded high frequency information to recover missing edge data. VT can adapt processing of the video (between Bob and Weave style methods) based on the content of the entire frame (whether it contains any motion). The disadvantage of VT may be visible as artifacts in areas of high motion, with an effect similar to trails (of the high frequency data) or motion blur (if VT is applied to both fields).
123
|